Bearing Deep Groove with 2 x Rubber Seals 20x47x14 Metric Husqvarna

R28,03 Including VAT

Description

6204-2RS (62042RS) Deep Grooved Ball Bearing X 2 Rubber Seals 20x47x14

p/n: XBER62042RS

Sealed Deep Groove Ball Bearing – Metric 20x47x14 Deep Groove Ball Bearings are the most common bearing type found in a wide variety of applications. Versatile and robust they are available in a wide range of sizes and options including seals, shields and special clearance for high speed applications.

The main types are:

Open – Bearing without seals or shields, suitable for applications where lubricant will constantly flow through them i.e. gearboxes.

Metal Shields – Bearings fitted with steel shields and lubricated for life.

Rubber Seals – Bearings fitted with steel reinforced rubber contact seals which provide a better seal but add friction so are unsuitable for high speed applications, lubricated for life.

Replaces OEM p/n:

  • Allis Chalmers: 1652231
  • Ariens: 05412300, 54123
  • AYP: 129895, 532129895
  • Bolens: 172-8225
  • Briggs & Stratton: 99158, 45-259
  • Castlegarden: 1921032/0
  • Craftsman: 532437282-cm
  • Case: 3159340R91, 537290R91
  • Caterpillar: 2L8579, 4M2996, 7F9993
  • Claas: 236752
  • Cub Cadet: ST207, SU-9001310-0001
  • Deutcher: Z35
  • Fafnir: 204NPP, 204NPP-A1665,204PP, P204NPP, P204P
  • FAG: 62042RS
  • Federal: 1204EE, 1204LL, 1204RR, 1204RR-SS, 204BLL, 204EE, 204RR
  • Fiat: 28996510, 401520, 899651
  • Ford: 192569, B6C10094A, B8C10095A
  • Gehl: 304154
  • Grainger: 1ZGH4 and 6L026
  • Hesston: 051268, 51268
  • Honda: 8100-43-970, 91102-VA0-13, 91102-VA4-013, 91102-VAG-013
  • Hyster: 43204TT, 55453
  • Husqvarna: 532129895, 738220419, 601001126, 738220419, 532129895
  • John Deere: 7677R, AM124479, JD10363, JD7142, JD7677, JD7677R, 30071, 6815, AZ12825, AZ20825, JD30071, JD6815Y, JD7142, JD9287, JD9459, M800451
  • Koyo: 62042RS
  • Kubota: 08101-06204, 6A700-16550, PL501-12160
  • Massey Ferguson: 350396X1, N1568
  • MTD: 741-0919, 941-0919, 941-0919A, 941-0919B
  • New Holland: 27291,27291A, 377714
  • Murray: 55541, 55541MA
  • NSK: 6204-2RS, 6204DD, 6204DDU, 6204VV
  • NTN: 6204LL, 6204LLB, 6204LLU, 6204LLU/4E, 6204LLUC4/4E, 6204LLU/L014
  • Poulan: 532437282
  • Ref No Bearing: 6204, 6204-2RS
  • Scott Bonner: 3531018, A112242
  • Simplicity: 118011, 118011SM, 1652231, 1652231SM, 2118011, 2118011SM
  • Snapper: 1-2828, 1735399YP, 7012828, 7012828YP
  • Stihl: 95030037650 9503-003-7650
  • Toro: 112-0377, 251-204,251-224, 251-318, 251-8,  251-297, 251-318, 251-8
  • Troy-Bilt: 1185121, 1728255
  • Victa: HA25001A
  • Wacker: 0182662
  • Weed Eater: 532437282, 437282,
  • Yanmar: 24104-062044

Fits Models: 

  • AYP: 917.270722, bottom bearing on spindle assembly
  • Cub Cadet: Mower Deck Spindle Bearing
  • Deutcher: Gearbox input shaft bearing , early EE5
  • Husqvarna: Spindle assemblies
  • MTD: Mower Deck Spindle Bearing
  • Rover: 
  • Scott Bonner: Chain bearing -30″ Queen and rear drum
  • Snapper: 60370 and 80499, 54″ decks
  • Troy Bilt: Mower Deck Spindle Bearing for Troy Bilt
  • Victa: Top & middle crankshaft, 125cc & 160cc engines (not Power Torque)

Specs:

  • Measurement Unit:  Metric
  • Inside Diameter:  20.00mm
  • Outside Diameter: 47.00mm
  • Width:  14.00mm
  • Seals or Shields:   Rubber Seals x 2
  • Clearance:  Standard

This bearing coms in both a sealed and a shielded version. Please select between the two below. Select 2RS for a sealed bearing or ZZ for a shielded bearing. This bearing can be found with the following part numbers on it 6204-2RS, 6204 2RS, 6204 RS, 6204RS, 6204-ZZ, 6204 ZZ, 6204ZZ, 6204 Z The 6204-2RS and 6204-ZZ is a 20mm ball bearing that is found in many applications. The 6204-2RS ball bearing has two contact rubber seals one on each side of the ball bearing. The 6204-ZZ ball bearing has two non-contact metal shields one on each side of the ball bearing. If your application requires a 6204 ball bearing with only one seal or shield you can get this ball bearing and take one of the shields or seals off.

Additional information

Weight 0,2 kg
Dimensions 10 × 10 × 3 cm